Nitecore Intellicharge i2

$16.00



Nitecore Intellicharge i2

No Li-ion battery comes with the charger.

The Intellicharge i2 is a universal, automatic charger which is compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers.

Features:
1. Capable of charging 2 batteries simultaneously.
2. Both battery slots monitor and charge independently.
3. Automatically identifies Li-ion, Ni-MH and Ni-Cd rechargeable batteries.
4. Three charging modes (CC, CV and Trickle Charge).
5. Automatically detects battery status and selects the appropriate voltage and charge mode.
6. 3 Color LED displays charging progress for each battery.
7. Automatically stops charging when complete.
8. Reverse polarity protection.
9. Designed for optimal heat dissipation.

Battery Activation:
For every installed battery, the i2 will activate the battery by charging it for six seconds at a low current.
If zero voltage is detected, all three yellow power indicators will blink quickly.
If activation fails the first time, please remove and reinstall the battery once again and activate for the second time.
Note: The i2 is not recommended for use with over-discharged (zero volt) UNPROTECTED Li-ion batteries.
Li-ion batteries without a protection circuit can potentially cause a fire or explosion.

Specifications:
Input voltage: AC 100-240V 50/60HZ or DC 12V 1A
Input power: 10W
Output voltage: 4.2V +-1% / 1.48V +-1%
Output current: 375mA x 4 / 750mA x 2

***Always charge batteries on hard surfaces. Do not charge batteries on flammable surfaces like carpet, beds etc.
Always keep the battery contacts or ports clean along with charger. Liquid or dirt on contacts can cause failure in the battery and/or charger.

Sold Out